| Name: | Shaft Seal, crankshaft; Seal Ring |
| Brand: | WILMINK GROUP |
| Part number: | WG1087870 |
For this product is not found offers for sale.
| Brand | Part number | Name |
| AJUSA 15088600 | 15088600 | Shaft Seal, crankshaft |
| CORTECO 19035345B | 19035345B | Shaft Seal, crankshaft |
| ELRING 394.011 | 394.011 | Shaft Seal, crankshaft |
| FIAT 9400127459 | 9400127459 | Shaft Seal, crankshaft |
| FORD 1 350 607 | 1 350 607 | Shaft Seal, crankshaft |
| FORD 3M5Q 6701 BC | 3M5Q 6701 BC | Shaft Seal, crankshaft |
| GLASER P77465-01 | P77465-01 | Shaft Seal, crankshaft |
| GOETZE 50-319501-00 | 50-319501-00 | Shaft Seal, crankshaft |
| MG Rover Group LR000674 | LR000674 | Shaft Seal, crankshaft; Seal Ring |
| MITSUBISHI MN982076 | MN982076 | Shaft Seal, crankshaft |
| PAYEN NA5192 | NA5192 | Shaft Seal, crankshaft |
| PSA (CITROEN/PEUGEOT) 96 458 632 80 | 96 458 632 80 | Shaft Seal, crankshaft |
| PSA (CITROEN/PEUGEOT) 0127.45 | 0127.45 | Shaft Seal, crankshaft |
| VICTOR REINZ 81-36556-00 | 81-36556-00 | Shaft Seal, crankshaft |
| VOLVO 30 757 228 | 30 757 228 | Shaft Seal, crankshaft |
| VOLVO 8 653 738 | 8 653 738 | Shaft Seal, crankshaft |
| VOLVO 30 725 004 | 30 725 004 | Shaft Seal, crankshaft |
| Model | Eng. cap. | Cyl/Val | Power Cyl/Val | Fuel | ProducedPr. |
| FORD GALAXY (WA6) | |||||
| 2.0 TDCi | 1997Diesel | 4 / 4 | 120 / 163 | Diesel | 2010 - 2015 |
| Name | Value |
| Fitting Position | Transmission End |
| Inner diameter [mm] | 90 |
| Outer diameter [mm] | 110 |
| Width [mm] | 7 |
| Radial Shaft Seal Design | ASW |
| Swirl Type | Left-hand Twist |
| Material | PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) |
| Dust Cover | with dust lip |
| Supplementary Article/Info 2 | with mounting sleeve |
| Thickness [mm] | 7 |
| Fitting Position | Transmission End |
| Inner diameter [mm] | 90 |
| Outer diameter [mm] | 110 |
| Width [mm] | 7 |
| Radial Shaft Seal Design | ASW |
| Swirl Type | Left-hand Twist |
| Material | PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) |
| Dust Cover | with dust lip |
| Supplementary Article/Info 2 | with mounting sleeve |
| Thickness [mm] | 7 |